Analog Temperature Sensor Module


৳ 70.00

Analog Temperature Sensor module for Arduino, measures ambient temperature based on resistance of the thermistor.
Specifications:
The NTC Analog Temperature Sensor module consist of a NTC thermistor and a 10 kΩ resistor. The resistance of the thermistor varies with surrounding temperature, we’ll use the Steinhart–Hart equation to derive precise temperature of the thermistor.
Operating Voltage 5V
Temperature measurement range -55°C to 125°C [-67°F to 257°F]
Measurement Accuracy ±0.5°C
Connection Diagram:
Connect board’s power line (middle) and ground (-) to 5V and GND respectively. Connect signal (S) to pin A0 on the Arduino.
S  A0
middle  5V
GND
Some KY-013 boards are labeled incorrectly,  if you are getting inverted readings (temperature drops when sensor is heated) try swapping power(middle) and ground (-).
Arduino KY-013 analog temperature sensor module connection diagram
Example Code:
The following Arduino Sketch will derive the temperature of the thermistor using the Steinhart-Hart equation. The code will return temperature in Celcius, uncomment line 17 to get temperature in farenheit.
int ThermistorPin = A0;
int Vo;
float R1 = 10000; // value of R1 on board
float logR2, R2, T;
float c1 = 0.001129148, c2 = 0.000234125, c3 = 0.0000000876741; //steinhart-hart coeficients for thermistor

void setup() {
Serial.begin(9600);
}
void loop() {
Vo = analogRead(ThermistorPin);
R2 = R1 * (1023.0 / (float)Vo - 1.0); //calculate resistance on thermistor
logR2 = log(R2);
T = (1.0 / (c1 + c2*logR2 + c3*logR2*logR2*logR2)); // temperature in Kelvin
T = T - 273.15; //convert Kelvin to Celcius
// T = (T * 9.0)/ 5.0 + 32.0; //convert Celcius to Farenheit
Serial.print("Temperature: ");
Serial.print(T);
Serial.println(" C");
delay(500);
}
The coeficients only apply to boards with a 10KΩ thermistors, some rare boards have 100KΩ thermistors and need different coeficients.
If the displayed temperature drops when heating the thermistor and viceversa a try swapping power and ground, apparently these boards are commonly mislabeled

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Analog Temperature Sensor Module”

There are no reviews yet.