Digital Light intensity Sensor Module V2.0


৳ 340.00

This Module is a 16-Bit digital Ambient Light Sensor Module with I2C bus interface.

Features:

 

  1. I2C bus Interface ( f / s Mode Support )
  2. Spectral responsibility is approximately human eye response
  3. Illuminance to Digital Converter
  4. Wide range and High resolution. ( 1 – 65535 lx )
  5. Low Current by power down function
  6. 50Hz / 60Hz Light noise reject-function
  7. 1.8V Logic input interface
  8. Light source dependency is little. ( ex. Incandescent Lamp. Fluorescent Lamp. Halogen Lamp. White LED. Sun Light )
  9. It is possible to select 2 type of I2C slave-address.
  10. Adjustable measurement result for influence of optical window
  11. ( It is possible to detect min. 0.11 lx, max. 100000 lx by using this function. )
  12. The influence of infrared is very small.

 

Specifications:

 

  1. Model No: GY-302
  2. Operating voltage (VCC): 3 V to 5V
  3. Operating current: 120uA (typ) 190uA (max)
  4. Operating Temperature: -40°C ~ 85°C
  5. Sensor Resolution: 16 Bits
  6. Peak wavelength: 560nm
  7. Interface Type: I2C
  8. I2C Device Address: 0x23 (when ADDR = LOW) or 0x5c (when ADDR = HIGH)
  9. On board Level Translators: No (requires level translator for 5V logic interface)
  10. I2C Maximum Clock frequency: 400KHz
  11. PCB size: 19.25 mm x 14.4 mm
  12. Weight : 1.1g (including header)

 

Pinouts:

 

  1. VCC : Power Connection (3V – 5V)
  2. GND: 0V
  3. SCL: I2C Clock Input
  4. SDA: I2C Data IO

 

ADDR: I2C Address Configuration Input

Documents & Downloads:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Digital Light intensity Sensor Module V2.0”

There are no reviews yet.