XL6009 DC-DC Step Up Boost Module

৳ 70.00

This DC-DC Module is based on IC XL6009E1 which is a high-performance step-up switching current (BOOST) module. The module uses the second generation of high-frequency switching technology XL6009E1 core chip that offers superior performance over the first generation technology LM2577. XL6009 replaces LM2577 module as LM2577 is about to be phased out.


  • Wide input voltage range of 3V – 32V (optimum operating voltage range is 5 – 32V)
  • Wide Output voltage range of 5V – 35V (Adjustable using on board preset)
  • Built in 4A MOSFET switches enables efficiency of up to 94% (LM2577 current is 3A)
  • High switching frequency of 400KHz, can use a small-capacity filter capacitors that can achieve very good results (LM2577 switching frequency is only 50KHz)


Specifications Value
Type Non-Isolated Boost ( BOOST )
Rectification Non-synchronous rectification
Input Range 3V ~ 32V
Output Range 5V ~ 35V
Input Current 4A (maximum), load 18mA ( 5Vinput, 8V output, no-load is less than 18mA . The higher the voltage, the load current increases.)
Conversion efficiency <94% (the greater the current, the lower the efficiency)
Switching frequency 400KHz
Output ripple 50mV (the higher the voltage, the greater the current, the greater ripple)
Load Regulation ± 0.5%
Voltage Regulation ± 0.5%
Working temperature -40 ° C ~ +85 ° C
Dimensions 43mm * 21mm * 14mm (length * width* height)


  1. IN+ input positive
  2. IN- input negative!
  3. OUT+ output positive
  4. OUT- output negative

Based on 0 reviews

0.0 overall

Be the first to review “XL6009 DC-DC Step Up Boost Module”

There are no reviews yet.